For a safe electric device, ground rods are important items. This is bereason the ground rod renders a course for the stray electrical power during the short circuit or any other reason.

You are watching: How to drive a ground rod in rocky soil

When driving the ground rod, you select the appropriate location to install the ground rod. But it becomes difficult for you once you are installing the ground rod in rocky soil.

We will guide you via some simple methods that will certainly aid you to drive a ground rod in rocky soil to make your electrical panel safe from electrical fire and injury.

What are the critical steps to drive a ground rod?


*

You have the right to follow below straightforward steps to drive a ground rod in the rocky soil.

Finding proper location

The initially crucial thing is to uncover the area to install the ground rod. You need to drive it firmly and also situate where you deserve to hammer the rod minimum of 8 feet down right into the ground.

Whether you install it closer or ameans from your structure, choose the location where you can hammer it for 8 feet dvery own. Rocky soil nearly extremely hard, yet you have the right to find some softer areas with a bit of search roughly your structure.

Set the path for grounding of electrode conductor

You will need it to connect through a ground rod through the electrical panel, so plan a course for grounding the electrode. So when picking the area for the ground rod, it is a vital aspect to take into consideration.

Encertain the grounding cable deserve to easily course via the electric panel wbelow you will certainly place the ground rod.

Ensure no hurdles in the way

When you are picking the area, also make sure that tbelow are no pipes or wires in the course of the ground rod. Ensure that you will certainly not damage anypoint in the ground where you will certainly install the rod.

Some national hotlines or gas pipelines deserve to be in the means, so make sure there are no such hurdles in the way.

Pick the approved ground rod

It is important to think about the specific metal product, length, and also width of the ground rod. So once you are in the sector, it is much better to buy a made rod clearly for that objective.

If you buy an apconfirmed rod, it is showed and will certainly encertain your correct size, width, and also rod length. No problem about that bereason a lot of of the stores have apconfirmed rods stock with them.

It is finest if you pick the copper product made ground rod because copper is the best conductor. You will must dig the rod 8 feet down in the ground, so take a length more than 8 feet, and recommfinished width need to be 1.3 cm. But if you are not buying an apverified rod, then 1.6cm width is correct to choose.

Dig a hole for the rod

Now you need to dig a hole; for installing the ground rod, you will need to dig a spot for a minimum of 8 feet down in the ground. You cannot hammer the rod in rocky soil so dig a hole for 8 feet to install the ground rod.

You have the right to use a shovel and also drill machine to dig the hole in the rocky soil. If you watch the below surface is softer, and also you deserve to hammer, dig a spot for a minimum of 4 to 5 feet dvery own through a shovel and also drill machine.

Once you view that the surface is currently easy to install the rod with a hammer, put the last finish of the ground rod in the hole and also start hammering.

Rocky soil is even more facility than other soils, so you will have to use a heavy-sized hammer and use even more pressure to install the rod in the hole.

Drive the rod in the hole

You can drive the rod in the hole with the use of a drill machine or any kind of various other heavy-duty driving devices. For the rocky soil, driving tools are better to usage than drill equipments.

Driving devices come with sufficient size rods that quickly can dig the lengthy hole in the rocky soil to install the ground rod in that difficult rocky soil.

Ensure that you have dug the hole for a minimum of 8 feet and also contact the ground. So for that objective, if the soil is exceptionally tough, then usage the driving tool.

It is the hard step of driving the ground rod in the rocky soil, and also it might take a much time, and also it is likewise complex to occupational. If someone deserve to assist you, it will certainly be much easier, but if you are alone, usage the driving tool.

You have the right to save one or two inches out of the soil surconfront, however it have to be spanned in the earth according to the rule.

Connecting the electrode

Pull the electrode conductor to affix it via the ground rod; once you have correctly pushed the rod into the ground, the next task is to integrate it through the building electric system.

For that function, pull the grounding electrode on the peak of the rod and make sure you have rerelocated sufficient size that is fit to connect it permanently.

After that, clamp the ground electrode conductor via the ground rod; you will certainly need one clamp gently put the rod and also conductor ends in the clamp and turn the screw of the clamp and also press them together firmly.

See more: Which Of The Following Is Not True Of Exercise Machines? Cumulative Exam (92%) Flashcards

In the end, affix the grounding electrode with the grounding bus; it will job-related as the neutral wires and connect through the electric panel. You have actually completed your project and also currently enjoy the safe electrical supply in your home.